Alligator® Lacing System
For systems with pulleys as small as 1” (25 mm) in diameter, Alligator® Lacing System offers an economical, low-profile splice that is hammer applied.
Features and Benefits:
- One-piece design provide uniform tension across belt width
- Engineered to prevent pieces from working loose from belt
- Hammer-applied; no special installation tools needed
Options:
- Available in steel or stainless steel
- Continuous lengths to fit any belt width
Applications:
- Conveyor and transmission belts, as well as sanitary operations
- Belts up to 1/2" (13mm) thick, with mechanical fastener ratings up to 200 P.I.W. (35 kN/m) and minimum pulley diameters from 1 – 14” (25 – 350mm)
| Product Size | Min Pulley Diam. (inch) | Belt Thickness (inch) | PIW max | Approx. Hinge Pin Diameter (inch) |
|---|---|---|---|---|
| 00 | 1 | 0"-1/16" | 25 | |
| 1 | 1 1/2 | 1/16"-3/32" | 45 | |
| 7 | 2 | 3/32"-9/64" | 50 | |
| 15 | 2 1/2 | 1/8"-5/32" | 65 | |
| 20 | 3 | 5/32"-3/16" | 95 | |
| 25 | 4 | 3/16"-7/32" | 100 | |
| 27 | 5 | 7/32"-9/32" | 100 | |
| 35 | 7 | 9/32"-5/16" | 150 | |
| 45 | 9 | 5/16"-3/8" | 165 | |
| 55 | 12 | 3/8"-7/16" | 175 | |
| 65 | 14 | 7/16"-1/2" | 200 |
- Product Videos
- Product Literature
- Installation Instructions
- Related Products
-
Tatch-A-Peg®
- Tatch-A-Pe® is a smart, simple way to prevent rollback of round product on steep inclines and partially loaded belts.
-
- When long cleat lengths are not required, Tatch-A-Lug® is an inexpensive but effective way to elevate cased, boxed, or bagged goods.
-
Econo-Cleat®
- With Fasteners and Hex Nuts
-
- Black, Plated Fastener, 24" long
-
- With Plated Fastener
-
- Technical Tips
